Hello guys, I need a dxf of a squirrel. It can just be a basic squirrel (not alot of detail). Thank you
Hello guys, I need a dxf of a squirrel. It can just be a basic squirrel (not alot of detail). Thank you
heres a squirrell
Here is a jpg of the same squirrel with some demention, if you can use it I,ll post it.
That squirrel will work myx, thank you
Squirrel stl file, I hope these are getting through ,I,m not use to zipping.
They are all done with a 90 degree carbide spot drill we use for deburring parts in the machine. I didn't like that I had to go fairly shallow on the keychains since the graphic was small. The deeper you go, the wider the cut, juneau?
I am just now getting my computer going again (hopefully) after a crash.
BCNC,
Here is a squirrel I drew to make a sail on a wind chime. With teeth and without.
Weldtutor can you share the file of the horse and carriage you modified? That looks good.
Jerry
Here is the horse & carriage file requested.
Have fun with it.
Those are happy looking squirrels you posted Jerry.
Anyone else with files suitable for plasma cutting, feel free to upload them.
As a Cubscout Cub Master and have two boys in and my wifes a Wolfs leader. We needed, what they call a Den Doodle so using Mastercam Art I did this.
Thanks for the DXF of X-mass stuff ,my wife wants me to make a bunch of stuff now.
Happy holidays to all of you.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Cadcam
Software and hardware sales, contract Programming and Consultant , Cad-Cam Instructor .
Here is one of the grim reaper holding a skull.Might need a little tweeking.Going to cut this out with plasma.
I did this from a picture of my oldest daughter.
Anyone interested in the board game called Aggravation?
Here's a couple I made one in 3/4" maple and one on 1/4" MDF
The MDF model used a .100" bit.
The maple one uses a 1/16" bit and a 1/2" round nosed flat carbide bit with a 1/4" shank.
Game instructions can be found on the 'net, marbles and dice can be purchased at game stores or Dollar stores.
Have fun.
does any of you know how to make a 3d model from a picture using soildworks I have 2005
thanks
Robert
Does anyone have a wolf howling at the moon?
Michaelm
Attached is a wolf howling at the moon that might work.
perfect, thats just what i was looking for
I have one.