[dan dimock]

Remember, this is the season to be jolly - thanks to both of you - here in Texas we have a song and story about the year when the snow storm was so bad that I had to use my 4-wheel drive truck to take Santa on his trip here in North Texas - So you may want to make a truck with Santa and his toys in it .

We have some small kids in our church that I am marking these to give to.

I am going to tell them a story about the two nice men that helped me with this, so that I could make them this year.

Dan

[Shotout]

My mother just lost her jack and I wanted to mill a plate with a jack russell terrier on it with a window for a photo, some embossed letters that kind of thing. Does anyone have a good profile or head shot?

TIA
Scott

[DISCONNECTED]

Here is a dxf file

[DISCONNECTED]

Here is another...

[HayTay]

My mother just lost her jack and I wanted to mill a plate with a jack russell terrier on it with a window for a photo, some embossed letters that kind of thing. Does anyone have a good profile or head shot?

TIA
Scott

Sorry your mother lost one of her best friends, Scott. Here's a little something I cobbled together for you. Maybe you can use it to capture one of her JRT's happier moments.

IHTH,

[Salty72]

Being the Season 2B jolly lets see if we can't get all those XMAS cutting files re-posted -I'm not on the CNCmachine now But I will post some DXF files to night

C'mon everybody want to SEeee.... Snow flake ...santas.... Raindeers Sky the limit...

[Salty72]

who can draw? anyone wanta go at this fella...

was done by hand first time round but looking at repeating with CNC

[Weldtutor]

C'mon everybody want to SEeee.... Snow flake ...santas.... Raindeers Sky the limit...

For many snowflakes, check out this good site! :wee::wee::wee:
http://snowflakes.beap.com/
Lots there to view & EPS files can be downloaded.

The Santa sleigh, 3 angels, & 2 reindeer ornaments in my collection come from an unknown source, so I cannot upload & credit the creator of them.

[Shotout]

Sorry your mother lost one of her best friends, Scott. Here's a little something I cobbled together for you. Maybe you can use it to capture one of her JRT's happier moments.

IHTH,

HayTay, Thanks a lot for the file, it is much appreciated.

[jfc11]

Being the Season 2B jolly lets see if we can't get all those XMAS cutting files re-posted -I'm not on the CNCmachine now But I will post some DXF files to night

C'mon everybody want to SEeee.... Snow flake ...santas.... Raindeers Sky the limit...

Here is a santa I drew up last year...made some yard art
Jim

[Salty72]

As promissed here is some Xmas stuff - there that should make things festive

[Salty72]

Ok you mean to tell ............... riding a old steam locomotive. Sorry ..........
BTW I have what I need.......... Thanks to those who sent and posted. .......................!

I know you said you had what you needed but here is another that might be of some use to you

[Weldtutor]

Three simple stars for the festive season.

[HayTay]

Remember, this is the season to be jolly - thanks to both of you - here in Texas we have a song and story about the year when the snow storm was so bad that I had to use my 4-wheel drive truck to take Santa on his trip here in North Texas - So you may want to make a truck with Santa and his toys in it .

We have some small kids in our church that I am marking these to give to.

I am going to tell them a story about the two nice men that helped me with this, so that I could make them this year.

Dan

HayTay, Thanks a lot for the file, it is much appreciated.

Both Dan & Scott, THANKS, for the thanks! It is most graciously accepted and appreciated. I'm glad to be able to help some other folks out on occasion. It'd be real nice to see some pics of the finished item(s) before you give all of your hard work away as presents. Hint, hint. Nudge, nudge.

Weldtutor and myself will have to work a little harder in the coming year so we can reach the next level and go from 'nice men' to 'wise men'. Just kidding, y'all have a Merry Christmas, Happy Hanukkah, Kool Kwanzaa, Wonderful Winter Solstice, or whatever it is you do to celebrate this holiday season!!!

:cheers:,

[RayinNH]

I finally made something from the firebird.dxf that was posted here. The material is 6061, size is 1.5" x 1.6", engraved .005" deep on both sides, with a 60 degree tool, on a Haas VF0. The color was made with a marker, & then just lapped it on some 600 grit emery cloth.

[Weldtutor]

Cut your tree with a CNC plasma arc this year.

Centre of tree is turned 90 degrees. Tree, star, & base are all from 1 piece.

Horse & carriage is modified from davek's file in post #1037, thanks.

[DISCONNECTED]

Here is a file of santas sleigh.....

[DISCONNECTED]

need snowflakes anyone?

[Jerry Dots]

Here is yet another sleigh.

[Weldtutor]

From the "Great White North," land of snow & igloos (flame2) unless we melt things down!

(Nice sleigh Jerry Dots.)