I'm new on here and I just want to share a 5 window coupe Dxf file I just got finished with. I'm just learning and getting into the plasma CNC. Let me know what you think.
I'm new on here and I just want to share a 5 window coupe Dxf file I just got finished with. I'm just learning and getting into the plasma CNC. Let me know what you think.
Hi all,
I am engraving a brass plaque for a 21st birthday present for a friends son.
She has given me the jpgs but I need help to convert them to dxf.
Can anyone help please?
here is another one:
http://www.3dmodelfree.com/models//27289-0.htm
KRP,
Hope this works for your project,
Jeff...
Patience and perseverance have a magical effect before which difficulties disappear and obstacles vanish.
OOPS!
I didn't see that there were 2 files, glad to see that the other one got converted.
Fatboy
hey, that was quick.
Very much appreciated Jeff & fatboy.
They will work great.
Would anyone have a dxf of a 1930 Ford 2 door sedan?
Camaro68,
Will this work?
Jeff...
Patience and perseverance have a magical effect before which difficulties disappear and obstacles vanish.
That's great, you wouldn't have a street rod version also?
Camaro68,
I chopped the top on this one,
Jeff...
Patience and perseverance have a magical effect before which difficulties disappear and obstacles vanish.
don't mine if i ask wat kind of program you using to change those picture from a Jpg into a Dxf file. with everything filter too.
thank you
also was wondering if anyone help me make this dxf please
Also can we scale this to fit a 7"x12" please.
Sangphung,
There are several programs, Inkscape will do and its free.
Hope this works for your project,
Jeff...
Patience and perseverance have a magical effect before which difficulties disappear and obstacles vanish.
I took a shot at making one of the Butterfly Puzzles in .063 aluminum yesterday morning and it turned out beautifully. I used a .062" 2 flute with a bit of kero to lube the aluminum running at 8 IPM's with .022" depth cuts.
I think if I had to do it all over again, I'd do it without tabs as it needed a lot of clean up. My wife loves it in the rough brushed natural aluminum, but I'd like to see it anodized in a color.
I had to seperate the parts into 3 sheets of 4X8" as I did this on a Taig Mill. Took about 120 minutes to machine and about another half hour to clean up the edges and put a rough 220 grit finish on it.
I have the "bug" now to make more of these, but time is not something I have a lot of
Thanks,
Dave
Dave->..
Nice work Dave.
btw Nice website too.
Tweakie.
CNC is only limited by our imagination.
I like it! Very nice work.
Fatboy
Thanks all
Dave
Dave->..
can anyone convert this jpg into a dxf? or does anyone have a dxf of the flag
http://www.cnczone.com/forums/attach...1&d=1276530965
Ryke,
Have a most awesome Fourth of July,
Jeff...
Patience and perseverance have a magical effect before which difficulties disappear and obstacles vanish.
thanks worked great