[mks80eng]

Help me please ..
My problem is simply that the wood engraving machine CNC when the process of engraving and cut off electricity, the machine re-engraving process from the beginning! Which cost me time and effort! I want to complement engraving from the point at which they were cut off electricity!
Please help me

[victorofga]

some control makes it automatically..

some of them, not

you need to find the X-Y cordianats were it ending, and delete the front of the g code..
little tedeious, but faster than rerun hours of machining..

is your zero can be found yet?

if not then you have to go to the first line of code and match with your part..

[daniellyall]

what control program are you useing

[daniellyall]

what control program are you useing

[mks80eng]

artcam

[mks80eng]

artcam

[Al_The_Man]

You will have to re-reference the machine, but some controls allow running from a block No.
All depends on your controller?
Al.

[daniellyall]

what program is running your machine mach3 or what ever

[mks80eng]

art cam

[mks80eng]

woodworking CNC router machine MT-C25B-Woodworking CNC router,CNC router-jinan morn

[victorofga]

you have a handheld dsp control

heres a pdf I posted as manual4dsp zip



you also should have from the seller..


it knows to restart from the last processed gcode block..

I don't using dsp, I using ncstudio..

it returns with last processed line or block..


please note, even software return to last processd block, you have to manually set the proper position, homing and from there you can find the end position of your work..