[fireblade_rr]

No probe for us.
But we got it finally.
After the fiasco with the setup moron.
I called Surfcam who created the post processor for us.
With their PP you reference from the top of the table.
I thought you had to do it from the center of axis.
All is well and I have made part successfully.


Thanks!

[Hermle UWF851]

Hi, I'm in the same boat as this post started. I can not transfer to my DMU 50T with a Millplus 433. I have CDS 5.0. Everyone keeps saying CDS lite. Where can I get this. Tomc3700 will you send it to me? I don't know what else to do. Any help will be most appreciated.

Frank

[jestevez]

does anyone know where i can get hte M code for the DMU 50?
I'm very dissapointed with DMG they've had this machine sitting here for 3 months and can't get it to work right...amazing how they keep lying to our faces...

[roadrunner3]

Hi Jesteves,
If you could elaborate more about your problem ,i may be able to help! You say that you need an m code to do what exactly.

ATb
pompey steve

[bite99]

I REALY NEED A USER'S MANUAL FOR A DECKEL-MAHO DMU-50T. PLEASE

[Jody20]

I know this is an old post but I am in need of the CDSlite program. My PC died and I canot find the old program disks. I cannot load a program into my Dekel Maho without the program. I have tried Gibs cam but the machine needs to see PM at the end of the program file for it to load. Gibbs Cam uses the ncf file extention and the Maho wont recognise the file.
Help please,
Jody

[speedwolf]

Hello,

has someone a Post Processor for Mastercam x4 for this Machine???
DMU 50V whit MillPlus

Greetings

[Tampio66]

Hi !
If you find one Please Let me know.
Have same machine.
Regards JR

[Tampio66]

Hi !
If you find one Please Let me know.
Have same machine.
Regards JR