Originally Posted by
cre8tunes
i have the 5T post but it gives me the wrong co-ordinates can someone please help me
Have you called your Mastercam Reseller?
You can also get help to modify a post processor in the MC Forum here in CNC Zone. http://www.cnczone.com/forums/forumdisplay.php?f=27
Also on the EMASTERCAM FORUM.
http://www.emastercam.com/cgi-bin/ul...cgi?category=1
Cheers!!!!!!
Toby D.
"Imagination and Memory are but one thing, but for divers considerations have divers names"
Schwarzwald
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
www.refractotech.com