Well the NSK site is a royal nightmare.....and still can't find the specifications for the LWH25 trucks.
Anyone have the mounting hole dimensions, etc.
Thanks,
Paul :cheers:
Well the NSK site is a royal nightmare.....and still can't find the specifications for the LWH25 trucks.
Anyone have the mounting hole dimensions, etc.
Thanks,
Paul :cheers:
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Or here:
http://www.ikont.com/products.htm
You'll have to register to download it. I had to do it as well to get info on the 15's I have
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
It took me a while to find the information on their site too. I've attached the pages that cover the LWH series. You just need to figure out which style you have or need.
Ray
Ozarkwoodworker.com