Lemme see ... here's what's in my hobby shop:

- two Southbend 11x60 lathes
- Bridgeport Series 1, 2hp 48" mill (with shaper attachment)
- DoAll 16" ML vertical bandsaw with blade welder
- Roll-in 14" vertical bandsaw
- Wellsaw 7x14 horizontal bandsaw
- Petrie 20" bandsaw (wood)
- Boyar-Shultz Challenger 6x18 surface grinder
- Jet 21" drill press
- offshore 17" drill press
- 3x89" FPS backstand grinder
- 2x60 Burr King 600 3-wheel belt grinder
- 2x73 Bee vertical belt grinder
- 20" disk grinder
- Rockwell dual head carbide tool grinder (with diamond wheels)
- several dual arbor Baldor & other buffers
- O/A torches, Lincoln 225 stick, MIG
- 3 Snap-on tool chests
- 2 Stanley Vidmar industrial drawer cabinets
- two Wilton 6" swivel machinist vices
- Snap-on 60 gal vertical 2-stage compressor
- 20 and 5 gallon parts washers
- large offshore sandblast cabinet with dust collector
- 2 scissor lift tables
- 2-ton portable hydraulic shop crane
- 2 smaller 1/4 ton shop cranes (one is electric)
- 24x36 granite surface plate
- and a crapload of handtools and tooling

- oh ... and a wall mounted urinal right beside the Duratub washup tub!

Two things on my want-list ...
1. bigger shop
2. 30 ton hydraulic press (once I have the bigger shop so I have room!)

Cheers, Bill