[fukeneh]

I need to program a milltronics lathe with centurion 7 controls. I dont have the lathe book and am not familiar with these machines. Any help with programming these machines would be great. Any link to the lathe book would help too. Thanks.

[trevj1]

Hit the Milltronics site, contact them and see if they will send you the conversational programming manual.

They used to have a download for the control simulator so that you can practice on the desktop computer too. Dunno if they still do, but worth a look.

Have the serial number of the lathe and of the control itself, in hand, if you want the correct books for the machine. Probably not required for getting hold of the basics, but if you need more than that.

Anyway, Milltronics has pretty good support for the users, available for asking. That's been my experience with them, anyway.

Cheers
Trev

[Farmers Machine]

what kind of part do you have to make and what model of lathe are you using?

[cncbpt]

What do you need to program?
I May be able to help you out
I run a sl10 with a cent 7
Also familiar with the VMC,s with this control
milltronics has one of the best controls in my opinion