I am trying to send a file to my model 0-M controller. It worked as recently as last week.
If I punch the I/O then READ I get the P/S 086 alarm.
If I try and send it from the original computer, same settings as the last 5 years. I get the P/S 086 alarm.
I have checked the cable, changed the cable, changed computers twice. I have tried using both CNCCOM and CicoEdit with the combinations of new and old computers and cables.
I have checked voltage on pins 7 and 20 12+ volts.
I have deleted and re-installed programs, com ports, and tried different programs.
I have checked the parameters, what I could find on them anyway.
I can not send a file from the controller to the computer.
Now this occurred since the replacement of a Fanuc power supply. But the machine has run programs already in the controller.
Any place else I need to look?
Thanks for your help.