Heidenhain 530 mill say handwheel
D error .
says check param
mp7640.
how?
Heidenhain 530 mill say handwheel
D error .
says check param
mp7640.
how?
If you have worked in the machine, it is unnecessary to check the parameter.
Check the cable!
Replace the electronic handwheel!
Check parameter:
Programming & Editing -> [MOD] -> 123 [ENT]
[GOTO] 7640 [ENT]
MP7640 Handwheel
Input:
0: No handwheel
1: Reserved
2: HR 130
3: Reserved
4: Reserved
5: Up to three HR 150 via HRA 110
6: HR 410
7 to 10: Reserved
11: HR420/HR520 without LED activation
12: In future for HR 550FS wireless handwheel
13: HR520 with LED activation