586,082 active members*
3,604 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > CamBam > cambam lead in betwean passes

Thread: cambam lead in betwean passes

Results 1 to 2 of 2
  1. 10-05-2013, 01:19 PM #1
    mrendu43
    mrendu43 is offline Registered
    Join Date
    Feb 2010
    Posts
    71

    cambam lead in betwean passes

    hello

    can i add lead in moves in pocketing operation when cutter going in next pass but on the same level.
    Reply With Quote Reply With Quote
  2. 10-07-2013, 04:35 PM #2
    ralfg
    ralfg is offline Neuer Benutzer
    Join Date
    Jan 2010
    Posts
    18
    hello,

    yes you can!
    If the Max. Crossover distance value is smaller then the Step Over and you use a tangent lead in, you get a lead in to every path on the same level. But you get also a retract to clearence plane for every path.

    ralf
    Attached Thumbnails Attached Thumbnails Bildschirmfoto 2013-10-07 um 17.34.50.png  
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Finishing Passes
    By laserpilot in forum Vectric
    Replies: 3
    Last Post: 07-29-2012, 02:13 AM
  2. G76 Number of Passes
    By eliot15 in forum G-Code Programing
    Replies: 13
    Last Post: 04-09-2011, 12:51 AM
  3. finishing passes of G76
    By sinha_nsit in forum Fanuc
    Replies: 7
    Last Post: 12-23-2010, 08:23 PM
  4. Roughing Passes Exceeding Finishing Passes
    By phoodieman in forum Mastercam
    Replies: 2
    Last Post: 03-01-2009, 01:21 PM
  5. Can't get multiple passes in v3.0
    By Vogavt in forum Uncategorised CAM Discussion
    Replies: 2
    Last Post: 01-26-2008, 10:57 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules