Hello Everyone,
I just bought a 4x8 CNC router parts.com Pro CNC. I am cutting 18" x .750" strips out of HDPE which is .250" thick. I am wondering on what spindle to get and I'm about ready to purchase this one on Ebay. Its a 2.2k water cooled with E20 collet.
Water Cooled Spindle Motor 2 2KW Inverter VFD 2 2KW Variable Frequency Drive L | eBay
Thread: Need Spindle Help!!!!
Results 1 to 3 of 3
-
10-17-2013, 05:21 AM #1
Registered
- Join Date
- Oct 2012
- Posts
- 11
Need Spindle Help!!!!
-
10-17-2013, 09:12 PM #2
Registered
- Join Date
- Aug 2011
- Posts
- 388
That should work (but if they are simple strips, I'd just use a tablesaw).
David Malicky
-
10-18-2013, 02:49 PM #3
Registered
- Join Date
- Jan 2011
- Posts
- 59
i think that the ebay spindle will be way tomuch more powerfull then what u need. i think u need to find a air coolled spindle without the vdf. i am using a hand held trimmer as a spindle on my cnc and it is working totally fine.
Reply With QuoteSimilar Threads
-
Spindle motor set,1pcs 2.2kw spindle + inverter+ spindle mount bracket+ER collet
By yvesleeok in forum News AnnouncementsReplies: 5Last Post: 07-19-2013, 05:16 AM -
Restarting the spindle after spindle stop while in automatic/tape mode on a VMC
By PhoenixMetal in forum Uncategorised MetalWorking MachinesReplies: 1Last Post: 06-27-2013, 09:11 PM -
VistaCNC iMach 3 Spindle Tachometer causing inconsistent spindle speed
By QueueJr in forum Uncategorised MetalWorking MachinesReplies: 4Last Post: 07-03-2012, 01:46 AM -
mach3 spindle dro not working, spindle speed changing while jogging and running code
By jasminder in forum Mach Software (ArtSoft software)Replies: 0Last Post: 02-23-2011, 07:12 AM -
FANUC OT B Spindle rpm fluctuating and causing 1008 Spindle Drive Fault
By Bill Gillen in forum FanucReplies: 4Last Post: 10-15-2010, 07:10 PM
Posting Permissions
