[headscraper]

Hi All!!
I am building a 3axis router and will no doubt need some advice.
I have experience with many cnc industries including software support. I have come here to learn more and hopefully help people with their problems.

[Le buzz]

Hi folks,

I am here to learn about laser engravers. Looking to purchase one and am loving all the info so far on this forum.

Cheers

[ryanmurphy]

Hi,

If anyone's interested, here's a short post on the challenges of laser cutting intricate designs:

Laser Cutting Small Details In Mild Steel Parts | Yorkshire Profiles

Does anyone have any other ideas as to other methods such as water-jet et al.

Cheers,

Ryan

[grosben]

Hello all!

[mkbryant]

Hello Everybody!

I'm a mechanical/design engineer currently working for a subsea construction/ROV service company. I have been reading the forum for a while, but haven't ever registered. I'm currently researching/planning to either buy or design/build my own hobby CNC router/mill. This forum seems like a fantastic resource, and everyone here contributes to what appears to be a community of like-minded individuals. I look forward to future reading and participation here.

Thanks,

Matthew Bryant

[Mandomann01]

Hello all very interested in hobby cnc

[cnc-lover]

Hi,

I'm a CNC Technician engineer currently working for a service company and doing service on CNC Machine-tools with Fanuc CNC Controls.

I love my job.

Regards

[rhu]

Hello
I'm a engineer , I design pcb's and programing uc.
I like cnc machine's and I like read some things cnc's
Robert

[themodernroute]

Hello,
I am a wholesale CNC Routing and Knife shop looking for connections and anyone interested in renting my time and machine.

Having fun making stuff for you!

[LautaR]

Hi there! Greetings from Argentina! Im new at the cnc world and as I was reading trough the inmense material about the subject I came across this site... there is a lot a valuable knoledge in here... hope In some time, I could be as usefull as you are for me now.

So... Ill start posting about my 40w CO2 laser cnc project anytime soon...

See u guys then!

Cheers!

[Arcant]

I'm a retired IT specialist after 47 years in the industry and I'm keen to continue using computers to pursue my other hobbies of live steam and Engineering in general.

[wallyw]

Interested in learning to CNC my mill and perhaps lathe.

[xir acrilicos]

Hola, es mi primer post, decearia saber porque al grabar me hace rallas anchas, el foco esta correcto, si al sacar el espejo del lacer que hace foco y al mirarlo esta como cristalizado, puede ser ese el motivo de que no me grabe bien? cortar lo hace perfectamente por eso no estoy seguro, desde ya agradesco que alguien me ayude
mil gracias Jorge

[n_duquette]

Worked around cnc since my first job as a teenager. Strayed away and found my way back. I've made the jump from metal to stone and its a whole new ballgame. Here to make friends and master my machine!

[igsvail]

Hey Everybody! I own and operate a sign shop in Edwards, CO. It is a full service sign shop featuring 2 large format Roland printers, a MultiCam 44 router and the usual vinyl and woodworking equipment for a shop of this type.

I bought the MultiCam used over 15 yrs. ago and it's still... OK, it was still running up until recently. I joined CNCZone in hopes of gaining some knowledge about my AC Inverter and to give back in any way that I can offer. The inverter started giving error codes a few weeks ago so I sent it to Radwell Int. for service. I got the inverter back last week and realized that all of the parameter settings were reset. I failed to anticipate this, so I did not record any of the previous settings. We've downloaded the manual for our TB Woods XFC20020B inverter, we've talked with a few service techs about where to focus our efforts but it's all been fairly general info. It seems that how we use our router dictates the values & settings we need to modify.

So, if anybody is familiar with sign manufacturing and running a cnc router, perhaps you can touch base with me for more details.

Thank you!
Angelo

[bespo]

Hello world
m retired now, and coming back to my old love - robotics.
Building a CNC-machine is first step to get the aknowledge how mechanics and electronics work together by producing great things.
I hope i would get the basics in this forum, thanks!

[imrtstc]

I am in the printing and Airbrushing industry and I am expanding into the CNC and Milling realm. I do custom airbrushing from T-shirts to Autos. My biggest customers are Fishing Lures. I am here to gain more knowledge. I will be getting a Mill in the future.

[prestizdizajn]

I work with furniture and am a beginner in CNC. morbidelli autor-510.

[ryangebs]

Hello Everyone,

I am a Mechanical Engineer and work in the automotive industry. I'm new to CNC, I got my X2 converted and my first few cuts under my belt.

Ryan

[makssxx]

Hi. Sorry for bad English. My name is Maxim. 2 years ago I bought a CNC machine, work a little. Accumulated a large collection of 3D models for the CNC. Ready to share. ??? ????????.rar ? ??????.???? download, choose to write on mail [email protected] or in private messages .. This is not all of the collection that I have.