[ostanleyj]

Hi, Stan from Chicago. I am trying to find a wiring diagram for the controller on a Bridgeport EZ Trak, 2 axies CNC form 1990, I believe be Southwest Industries. I had to replace the scale from Accu-rite and the new one reads with positive / negative directions reversed. I was told there may be a switch on the controller to change it.

[JoseDeMunck]

Hi there. My name is José from Venezuela, recently got a custom made CNC machine with a Truper router, plan to use it for a small business. I am a metallurgical engineer with over 12 years of experience. Made my grade thesis in stainless steel welding, and have a strong metals conforming, milling and machining background from my university days, wich has helped me a lot to understand the mechanics involved in CNC. However I´m starting to open my eyes in this new universe, and I love it. I hope to learn a lot, and teach whatever I can. Synergic knowledge, anyone?...

[jeffie3t]

Hi I'm Jeff for Florida.

[oxfordgirl15]

I'm Sarah from Canada
I work in a Machine shop and do all the programming for machine parts and cutting files. Hopefully i can learn a little more from some of you!

[Tomppa72]

Hi,

I'm Tomi from Finland.
At my work I repair CNC machines. I have found great information from CNCZone.
Plans to build simple cylinderhead CNC machine....any ideas

[jh3427]

I am Jan, from California. Looking forwRd to learn some amazing stuff.

[Rockin28]

Hi I am Roy from Georgia, originally from Canada. I operate boring mills and milling machines. I am thinking about getting into CNC wood router, just not sure best machine to go with yet. I want to learn more about G code.

[Rockin28]

Hey send me some Shreddies! lol just kidding. Welcome to the zone.

[DilipJaiswal180]

Dear Sir,
We have Problem in GSK 980 TDb Controller

"Machine Lock" Button is On.
So Machine Is not Working Properly.

I want to OFF Machine Lock Button.
What I do. Please Help.

[Honomusam]

Aloha all I'm Sam from Hawaii. I'm completing a krmx02 cnc and am looking to build my knowledge on cnc machining.

[HFab]

Hi all,

From Australia, new to cnc plasma but keen to learn more!

[Moriduri]

Hi, I'm Matteo, a Computer Science student from Italy, I'm interested in CNC, mechatronics, electronics, computer science and so on..
See you!

[rutgercoehoorn]

Hi i am rutger from thue Nederlands.
Lookin for info cnc over here.

[expert]

hi, good morning to all. my motto to join this group is to learn more and more in CNC,and would also like to help members of this community with day and night support at any cost.

thank you.

[_Nikola_]

Hi,
I am Nikola from Serbia and I would like to learn about CNC technology.

[zouzou_837]

hi im joe , i need some help i have a lathe ( WMW VEB DLZ 500/II ) i need the thread table chart for this lathe if some bdy can help me thanks

[NYC]

Hi,

My name is Patrick. I'm interested in taking up a new hobby to make things. I thought this would be a good place to start. I'm researching milling machines to make my first purchase.

[rodw]

Hi, I'm Rod from Brisbane Australia. I never thought I'd get into CNC but after playing with an Arduino, a stepper motor and a rotary table, I'm hooked! Currently working on designing a gantry for a CNC plamsa table as it seemed a cool thing to do with my plasma. Most of the parts in my gantry will be laser cut and welded together with tab style construction. I've been lurking here a long time learning as much about Plasma tables as I can. Jim Colt's contribution is amazing. I'm planning on using my BOC 40amp plasma cutter and am encouraged because it uses a Thermo Dynamics torch!

[michael-f]

Hi , my name is Michael
I work alone in my company with 3 CNC machines, one lathe two milling machines.
I find this forum for a good place for exchange between people, thanks.
Have a good day

[kogi]

Hi, my name's Bob. Fairly new to CNC, but have a little experience. Use it to build parts for my motorcycles and help the wife with her craft projects.