Hello! I am a hardware engineer from San Francisco, CA, working in a prototyping lab. I am currently resurrecting a 3040T-DJ CNC Mill and looking forward to learning and sharing with this forum.
Cheers,
Bill
Hello! I am a hardware engineer from San Francisco, CA, working in a prototyping lab. I am currently resurrecting a 3040T-DJ CNC Mill and looking forward to learning and sharing with this forum.
Cheers,
Bill
Hello from Ireland,
being browsing for ages and now got to contribute about my own build of a small tough drill press.
My name is Paul from Buffalo New York. I work at a small machine shop and I am in the middle of an old Cincinnati mill using a US Machines controller with AEG drives and a Dynapath 2000 CNC/PLC. It's close to being done, but I have a couple questions.
Hi,
My name is Bill from Georgia. I am a software engineer III working for a company called Yardi. I am currently working on my Master's degree in CS. I have a number of hobbies including electronics, and robotics. I've recently built my own CNC and am still learning.
You can see some of my current projects here: My Projects – This is where I'm going to post updates on my current projects
Hi this is eric,
i build electric bikes in el segundo california.
we have a full cnc shop.
we construct our own lithium batteries...thank you for having me to your group.
you can see my website on Luna Cycle Fast Ebikes and Electric Bike Kits
hi this is eric,
i am a new machine shop owner and we are building fast electric bikes in el segundo.
we have a complete machine shop.
we also build our own lithiuim batteries in house.
Greetings lads, my name is Miroslav, mechanical engineer, I am from Serbia.
In our company we have 5 CNC machines, 2 cnc lathes, Hitachi Seiki TF25 an HT23RIII, 3 cnc milling machines, DMU 80 P, DMU 80 E and Schaublin 33.
I had found this forum because I need help somethimes also because I want to help someone in trouble.
We need each other
Thanks.
Hello,
My name is Jason and I'm an Engineer at Resonance Group in Ohio. I'm interested in CNC machining and have some experience in the area. Glad to be apart of a community that is into CNC-related design.
Hi Im Jon, electrician and Noob machinist.
Hello everyone,
I'm Keegan, and I'm here to research and learn for my first CNC build. I'd like to build a router for woodworking. My ideal size would be 4'x8' but realistically I'm probably looking for 4'x4' or 3'x4'. I'd like to keep my budget around $1500usd.
I'm a pretty good welder. Mostly Tig (steel, aluminum and rarely stainless and magnesium) but have I a MIG setup as well.
Hopefully with the endless depths of knowledge here in the forums I can determine if my goals are realistic.
Thanks to everyone who has donated their time and expertise!
Keegan
Sent from my SM-G930V using Tapatalk
Hello Jason, This is Mian Mazhar from Pakistan. I am basically a software guy and interested to establish a cnc machine. How can u help me in this regards?
Hello! My name is Anel ,I am mechanical engineer who works as a trumpf laser programmer and operator and i somethimes need help about laser errors and similar stuff.
Hello, Pascal here from The Philippines. I am originally from Ireland, but live and work in The Philippines for several years.
We also run a charity for the poor (registered foundation), and I am planning on building a cnc machine as part of an education project and then a possible livelihood coop.
I have started canvassing for free cnc software.
I am a qualified carpenter/joiner and done my apprenticeship in the late 70's - early 80's.
Hi, my name is Przemek, i'm interested in building home CNC.
Hi all,
My name is Krystian (Poland).
I am engineer in aerospace company (CAD, CAM, fixture designing NC and introducing).
Hello,
Electronic Enginering Technologist and general Maintenance person at a small Manufacturing company. Total noob to CNC, just starting to learn.
Hello! I've designing sheet metal products for a number of years and just recently took over programming the Amada CNC punch press that blanks the components. Looking forward to learning.
Hola!
New user that came across the site researching for a DIY Arduino based CNC/Laser engraver. This is a new hobby for me as my primary job is in IT.
So here I am drinking from the Fire Hose of Knowledge™!
Newbie here, I have been looking for awhile at various versions and combinations of 3d printers and CNC machines, and have decided to start an X2 CNC project and see where it goes.