Hello all,
I have been lurking and asking questions and researching for a while now. Well, I finally got the nerve to start building my own router. I have decided to go with a stock JGRO design with the exception of using 3/8-16 allthread for the leadscrews. I am not sure how to post pictures here but am documenting it on my website if you want to look.
You can find it here:
Joe Hildreth's - My Heap Website
At this point I have the motors and controller (HobbyCNC 4 axis) and power supply done. I have the Z Axis finished and have started on the X axis.
I want to thank you all for the vast amount of very helpful information you guys and gals have provided!
:cheers:
Joe Hildreth