[NetStorm]

Could someone please show me how I am supposed to wire the diodes in this schematic. I am completely new to electronics and I just don't get how this diode is supposed to join the others.

An explanation or a photo of it did would be very helpful. Thanks in advance.

http://www.pyroelectro.com/tutorials...atic_large.png


Sent from my iPad using Tapatalk - now Free

[Al_The_Man]

What do you mean by how to wire them? How to orient them or the physical nature of installation?
The arrow points to the stripe end of zeners and diodes.
What circuit board are you placing them in?
Or how are you putting it together?
Al.

[NetStorm]

I'm trying to do it on a breadboard. It seems one end goes to gnd, the other to the out put and the other to vs but there should be 4 ends not 3?

I hope this make sense.


Sent from my iPad using Tapatalk - now Free

[Al_The_Man]

It is pretty much self explanatory, D1 -D4 go from the 4 ouputs to +ve.
D5-D8 go from the outputs to -ve (Common).
Two banks of 4 diodes.
Where is the 3 ends coming from?
Al.