Dear all Friend
Iam looking to gpp file for Variaxis mazak machine,model VRX630 0r VRX700 shut be ok,i'll be edit if not suitable
anybody can help Please.....
Dear all Friend
Iam looking to gpp file for Variaxis mazak machine,model VRX630 0r VRX700 shut be ok,i'll be edit if not suitable
anybody can help Please.....
Like ALL solidXXX stuff, you need to buy a license, I guess, and only the latest version, and not backward compatible, either. Yes. It sucks.
Super X3. 3600rpm. Sheridan 6"x24" Lathe + more. Three ways to fix things: The right way, the other way, and maybe your way, which is possibly a faster wrong way.
I can help: [email protected]
Solidcam x,I email to you already,but you also never reply my mail,how u can help bro...
Give me your email?
I Need help,when i post the program,g-code format show XY And Z is a wrong value But A,C Axis come out the actual value,I Check this error from machine simulation,Please help me wish area from post processor need to change.I'm so tired n very sad....
Attachment 209192
Zarif,
Sorry & sad I understand.
You are moving axis A,C, X,Y w/o dynamic compensation turned on (G54.2 P1)
Unfortunately your code seems to be missing vital data such as: machine rotate points, dynamic compensation; all necessary for a VariAxis.
The below code works for our VariAxis
(Post 8.23.13)
(Date: 19-NOV-2013)
(Time: 07:50:50)
G10 P6 L2 X-9.02973 Y-3.54230 Z-20.78210 A#7004 C#7005(Set G59)
( Use G54.1 P1. to set part)
G10 L20 P20 X#7001 Y#7002 Z#7003 A#7004 C#7005(Sets G54.1P20 to G54.1P1 )
#100=#7001+9.02973 #101=#7002+3.54230 #102=#7003+20.78210 #103=#7004 #104=#7005
G10 P1 L21 X#100 Y#101 Z#102 A#103 C#104(Set G54.2)
M00 ( #### WARNING do not run high speed spindle with this post ### )
G54.2 P0
M44 M47
G00 G91 G28 Z0
G53 G90 X-15.
G17 G20 G40 G80 G94 G98
T05 T005 M06 D5
G40 G80
M01
G94
(====================)
N4 (**F-CONTOUR1 **)
G0 G91 G28 Z0
G90
G59
G54.2 P1 X0. Y0. Z6. A-90. C-90.
G00 G90
A-90. C-90.
G0 X0.0059 Y0.5019 S8500 M03
G94
Z1.3875
M8
Z0.5787
G1 Z0.5 F15.
X0.0086 Y0.5035 Z0.5
hope this helps.
DW
Zarif,
The attachment is what I was sent by Mazak support to develop our post. All dimensions in English.
DW
Good afternoon, could you help me with the post-processor for Solidcam for the Mazak Variaxis i600 machine? I want will learn to work in Solidcam and to write the thesis on this machine.