[Superman]

I am wanting to cut cycle time further, but....

when executing M5 ( spindle stop ), it does not happen while moving the axes. It occurs after getting to the target position.
- main spindle needs to be stopped to allow milling mode ( live tooling ) to be used.

ie G28 U0. W0. H0. M5

What, if anything, needs to be done to allow the m-codes to be executed simultaneously with axis movement ?
- cannot find anything relevant in parameter or operator manuals, closest is to allow 3 m-codes in one block.

*** Machine & control on title line

[Heavy_Metal]

Hi Superman,

Did you try this,

G0 X200. M5 (metric mode)
G28 U0 W0 M9
G28 H0

Regards,
Heavy_Metal

[guhl]

I found it in manual for 0TC, I think there is the same info for 0iTB

[Superman]

Thanks, guys

Forgot to mention, I did go through the Hardinge Manual as well, cover to cover
- also tried the M5 in other configs. Same result...moves to target.....then does the m-code

[guhl]

also I've found the another mention about it
Attachment 206424
upload your ladder

[Superman]

Found the fix

- it was a keeper relay .... in the electrical manual
titled.......... "M50ST" K05 parameter#6 ( check your own manuals before changing.... there may be differences between machines )

Also changed a couple of others ie getting rid of the "DOOR OPEN" screen ( screen doesn't change when you open the door )

[phucrobusl]

Can please help me same machine Harding talent 8/52 backup & PMC file i need it with oi-tb