[bluej_x]

Need help restoring parameters on a 1998 Daewoo Puma 250B. Our lathe is pretty much stock configuration. It has the tool setter arm and a tail stock and that's it.

Our machine's 3V battery died and we lost all our parameter. Does anyone have a comparable machine that they can download their parameter to a floppy disk?

[bluej_x]

Forgot to mention, our machine has a Mitsubishi Meldas 500L controller.

[dhardt]

I have a paper copy that I've scanned for you. The file is too large to attach here. Please send me an email so I can reply with them.

[email protected]

[dhardt]

Lets see if this fits...See attached (if it does)

Email me if it doesn't...

[bluej_x]

Lets see if this fits...See attached (if it does)

Email me if it doesn't...

Thanks for uploading the parameters. Looks like it's exactly what we need. Will update you on the machine resurrection when it occurs.

Just one more question: This file contained 38 pages. Does your file contain more than that or is this complete?

[dhardt]

Thanks for uploading the parameters. Looks like it's exactly what we need. Will update you on the machine resurrection when it occurs.

Just one more question: This file contained 38 pages. Does your file contain more than that or is this complete?

The original PDF is confirmed as having 38 pages (note: some page numbers x/19 have multiples as parameters on those pages are used SPECIFICALLY for the machine configuration in the page's title block description)

[bluej_x]

The original PDF is confirmed as having 38 pages (note: some page numbers x/19 have multiples as parameters on those pages are used SPECIFICALLY for the machine configuration in the page's title block description)

Great! Thanks again for your help.