Hi Guys,
My company has just purchased a new Haas Tm2 3 axis milling machine to replace an aging Deckel FP3-50. We are running hypermill V9 that was purchased around 2004-2005.
The post processor that I have is not suitable and I am having to change alot of code and formatting to get the Haas to run.
I have access to hyperPost which I believe is for creating or editing posts but it will only open .Omf files and the post processor files are .Oma I believe that the .Omf files are created and then converted to .Oma. There is only one post available to select so I guess it was supplied specifically for the Deckel.
I have already contacted Openmind (uk) for advice but am awaiting a response. We are not on a maintenance contract so even if they can help I am expecting a sizable bill. Could any of you guys maybe shed some light on the subject as Post processors are not really my forte.
Thanks