I ran out of metal cases but have them on backorder. Should have them in a couple weeks. In the meantime I laser cut front and rear panels for my large ABS case and machined the top and bottom.
Here are some pictures. Note that there is still room for relays and other stuff. The three db9 on the rear panel can be used for additional axis or for I/O that the user may want to add.
Dan Mauch
Camtronics, inc. -- CNC with Dan Mauch
Results 1 to 3 of 3
-
11-02-2013, 08:54 PM #1
Registered
- Join Date
- Feb 2008
- Posts
- 243
New case for the Ethernet Smooth Stepper and the G540
-
11-04-2013, 05:49 PM #2
Registered
- Join Date
- Apr 2004
- Posts
- 135
I really liked the metal cabinet that you had. Is the basic (unmachined)
cabinet a commercially available item?
-
11-06-2013, 04:20 PM #3
Registered
- Join Date
- Feb 2008
- Posts
- 243
Yes I do manufacture the front and rear panels but right now I am out of the enclosures. I expect to have them in about 1 week
Dan
Camtronics, inc. -- CNC with Dan Mauch
Reply With QuoteSimilar Threads
-
G540 with an Ethernet Smooth Stepper
By dmauch in forum Gecko DrivesReplies: 10Last Post: 04-04-2015, 06:21 PM -
NEw case for the Eythernet Smooth Stepper and G540
By dmauch in forum SmoothStepper Motion ControlReplies: 0Last Post: 11-02-2013, 08:50 PM -
ethernet smooth stepper
By daniellyall in forum Mach Software (ArtSoft software)Replies: 1Last Post: 08-08-2013, 07:40 PM -
Smooth Stepper Ethernet Board - Mach3
By mrpackethead in forum X3/SX3/G0619/G0463Replies: 3Last Post: 05-09-2013, 02:04 PM -
CNC Breakout Board+Ethernet Smooth Stepper, Mach3, Motion Controller, CM106-ESS
By Robiz in forum News AnnouncementsReplies: 1Last Post: 10-05-2012, 12:24 PM
Posting Permissions
