[Davey]

Hi,

Am not to sure if this is in the right location, but here goes. I require certain information to do with cnc/cam. I wonder if you kind people could help a learner. Or have links for the information i require.

In-Process Measurement
Post Process

I will post a few more when i get home.

Cheers. :cheers:

[WayneHill]

This is a good place to post your questions. Please continue.

[Davey]

Cheers i will update the questions when i get home. Thanks once again.

[Davey]

Here you go. I information for the following.

Tooling Verification
Datum & Location Checks
In-Process Measurement
Post-Process Inspection
Quantitative Data & Arrributes
Statistical Analysis
Technical & Management Information

Tactile Sensing
Non-Tactile Sensing
Data Transmission Features
Adaptive Control Methods As Applied To CAM

Any help would be a bonus.

[Davey]

Any body.

[fkaCarel]

So you need to know all about the methods and measuring equipment used in a production factory with an above average budget. I think you can come up with a lot of answers, using an internet facility called "Google".

Carel

[Davey]

So you need to know all about the methods and measuring equipment used in a production factory with an above average budget. I think you can come up with a lot of answers, using an internet facility called "Google".

Carel

I have tried.

[fkaCarel]

Okay, keywords "Mitutoyo Measurlink" (original name) or "Mitutoyo Measurelink" (the misspelling) will give you an entry.

Carel

[HuFlungDung]

tactile sensing
http://www.soton.ac.uk/~rmc1/robotics/artactile.htm

in process measurement
http://www.engineeringtalk.com/news/rea/rea224.html

cnc data communications
http://www.findarticles.com/p/articl...v61/ai_7498269

[ctate2000]

The measurement features you are asking about do not usually require CAM or CAD software. They are done using macros. You must have the proper equipment like probes or laser measuring devices. Macros control the motion of the machine and perform the calculations along with data I/O. Any of the companies like Renashaw or Marposs can help with the process. Much of what you require may be user specific, meaning you will have to do some programming and development yourself. If you have more specific questions please post.

[stevenmotor]

Hi,
Stepper motor used in CNC machine for you reference.Welcome to contact with me [email protected]

Steven

[dertsap]

Hi,
Stepper motor used in CNC machine for you reference.Welcome to contact with me [email protected]

Steven

hey dude ive noticed youve been posting your add in a good number of threads , i beleave there is a proper place for that type of thing ,
it s a lil distastefull to be mucking up a guys thread with ads ,

try ebay

[Davey]

Thanks for the information. :cheers:

[Davey]

I have tried googling for the last four information to no avail. Could some one please post some links.

Datum & Location Checks
Quantitative Data & Arrributes
Technical & Management Information
Data Transmission Features


Or any information on these.

[dertsap]

http://www.scirus.com/srsapp/

great search engine for information

[Davey]

Cheers