Hi, Is it possible to have Mach3 installed in the standard "C:\Program Files (x86)\Mach3" location, but have the .set file(s) and Bitmap folders in a different location e.g. D:\Mach3 ?
I can get mach 3 working with this arrangement IF I load the .set file every time on start up. I would like to have it default to the .set file on the D: drive on start-up, is there a config or command line parameter for this?
ex-egll
Results 1 to 2 of 2
-
11-11-2013, 02:16 AM #1
- Join Date
- Jan 2013
- Posts
- 23
Move .set and Bitmaps Folder to different drive?
-
11-11-2013, 02:23 PM #2
Community Moderator
- Join Date
- Mar 2003
- Posts
- 35538
As far as I know, no, you can't.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Reply With QuoteSimilar Threads
-
Creating a fossil with bitmaps
By cncadmin in forum EnRouteReplies: 1Last Post: 03-27-2012, 09:30 PM -
3D from bitmaps
By Joe Crumley in forum Uncategorised CAD DiscussionReplies: 9Last Post: 05-30-2010, 05:03 PM -
Missing bitmaps HEEEELP plase
By Steve-M in forum Mach Software (ArtSoft software)Replies: 5Last Post: 11-12-2008, 10:08 PM -
3D Modeling with Bitmaps
By Joe Crumley in forum CNC Wood Router Project LogReplies: 23Last Post: 04-04-2007, 12:10 AM
Posting Permissions
