Hello guys,

I have a CNC turning machine with control Fanuc 18i-TB
The machine has 2 axis only Z and X

I was moving the X axis by JOG in the "-X" direction
but i excess the limit and the Alarm 411 X Axis Excess ERR appears
I can't move this Axis back since this error

I tried to increase and decrease these parameters:
1829 > Positional deviation limit value when axis stops
1829 > Positional deviation limit value during movement
Rapid Traverse Feedrate
Manual Rapid Feedrate
JOG Feedrate

But with no Luck the Axis doesn't move and the alarm 411 appears and the machine make E-Stop state!!
Also after many tries the alarm 436 X Axis SOFTTHERMAL (OVC) appears !!