I've been working with autocad for years and just now had a window appear whenever I type a command in and it shows the coordinates. How can I remove this box?
Thread: autocad command box popped up
Results 1 to 3 of 3
-
12-04-2013, 03:46 AM #1
Registered
- Join Date
- Dec 2013
- Posts
- 2
autocad command box popped up
-
12-04-2013, 04:12 AM #2
Community Moderator
- Join Date
- Mar 2003
- Posts
- 35538
turn off dynamic input. You should have a box labeled DYN in the left side bottom of the screen.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
-
12-04-2013, 04:15 AM #3
Registered
- Join Date
- Dec 2013
- Posts
- 2
That was it!! Thank you!!!
Reply With QuoteSimilar Threads
-
Popped a surge protectors breaker and now have a load meter idea!
By Smertrios in forum Taig Mills / LathesReplies: 9Last Post: 12-17-2012, 05:55 PM -
AutoCAD text box (command box)
By Jordtech in forum AutodeskReplies: 2Last Post: 10-11-2011, 12:36 AM -
I popped my cherry!!
By simila95 in forum Benchtop MachinesReplies: 10Last Post: 03-12-2011, 03:11 AM -
Just Popped in to say Hi
By kawazuki in forum European Club HouseReplies: 1Last Post: 02-17-2008, 09:57 PM -
Autocad to cnc -and the "list" command
By draftingrus in forum G-Code ProgramingReplies: 3Last Post: 04-09-2007, 11:09 AM
Posting Permissions
