We have a puma 8s fanuc series o-t control that when turned on it shows a screen with all types of alarms and it keeps on showing machine not ready what to do ?
😜
We have a puma 8s fanuc series o-t control that when turned on it shows a screen with all types of alarms and it keeps on showing machine not ready what to do ?
😜
Post what alarms you have displayed, then we can help.
I have owned afew Daewoo Puma 8s lathe's in the past. Take a photo of the screen and send it to me at [email protected]
Mike Roy in Canada
Alarms showing up are as follow :
400 servo alarm : (overload)
408 servo alarm :serial not ready
414 servo alarm: x axis detect err
424 servo alarm : z axis detect err
Also machine displays ( not ready)
😜
You have an axis drive problem that is keeping you in Estop (not ready)
Any recommendations on we're do I have too look for it or how to fix been like this for month 1/2
😜
First thing to look at would be the contactors near the servo drives. "Overload" is usually just thermal switch tripped on. Either that or a fuse...