So I wrote this program on the machine (not sure where all the giberish came from but I believe all the values are there)
N1 G17 G40 G64 G90
N2 TRAFOOF
N3 CYCLE800()
N4 ;M90
N5 ;PROBE WEBS
N6 ;DRILLING TOOL
N7 CYCLE800()
N11 T="15" ;PROBE
N12 L6
N14 G0 G153 Z-08.1 D0
N15 G0 G153 X-17.25 Y-08.1
N16 G54
N17 D1
N21 ; --- PROBE WEB ---
N22 G0 X-2.2665 Y0.83
N23 G0 Z.1
;NCG#M_977_979_Nut_Steg_ST#mz77_b_s.com#NC0#3#*NCG ;*RO*;*HD*
;######"Yes"##########5##1##1##4##1############### ###################85#15#20#155#45#40#45########## 2#2#2#2#2#2#2#2#2#2#2#2#2#2#2#2#5#"S"##977###1##1# ###1###1#######5#4###0#1#0#0#0#0#1#0#1#4#0#0#0#0#0 #2#0#0#1#0#0#0##0#4#0#1#1#0#0#0#0#0#0#0#0#0#0#0#0# 1#1#"S"#############################0#9#1####S4#S5 ###1##0#0#0#0#0#0##0#0#"Wear"###*NCG;*RO*;*HD*
_MVAR=11104 _SETVAL=0.008 _PRNUM=1 _KNUM=0 _FA=2 _TSA=0.02 _MA=2 _STA1=0 _VMS=0 _NMSP=1 _ID=-0.15 _SZA=0.33
CYCLE977
;#END#*NCG;*RO*;*HD*
M1
N34 ; --- PROBE END ---
N35 M9
N36 M5
N37 CYCLE800()
N38 G0 G153 Z-0.1 D0
N39 G0 G153 X-29.25 Y-0.1
N40 G54
N41 D1
N42 CYCLE800 (0,"DMG",0,57,0,0,0,0,0,0,0,0,0,-1)
N43 CYCLE800()
N44 M30
The program runs and probes correctly but I don't know how to find / write the answer. How can I write the solution to an R Variable? (The program probes a web thickness.)
Thank you