[EL DUKE]

Anyone has a postprocessor for machine HAAS mill with HAAS controler ??

Thanks!!!

[ssozonoff]

Hi,

Let me know if you find something. I have just received my Haase AL1290 and I have started setting it up. I work with Solidworks and am testing SolidCam as well.

Not sure if I can simply take the GCode from SolidCam and put in into CNCGraf which is the software I got with the Haase

Ooops just realise. We are probably talking about different Haase companies.

Thanks,
Serge

[Tstallones]

I ended up emailing the CEO in Israel for help. He did at least get
a software man in Germany who was smart enough to find the problem.
Still today I cannot trust the code unless it is confirmed with g-code simulation.
Wrote this in anger after a broken $40.00 tool. Tod Stallones

[KevinWilkins]

Hi,

Let me know if you find something. I have just received my Haase AL1290 and I have started setting it up. I work with Solidworks and am testing SolidCam as well.

Not sure if I can simply take the GCode from SolidCam and put in into CNCGraf which is the software I got with the Haase

Ooops just realise. We are probably talking about different Haase companies.

Thanks,
Serge

Contact www.solidcam.de in Germany. They should be able to sell you a post processor for your machine. Who is your dealer in Switzerland? Looks like they should be able to sell you one too?

[ssozonoff]

Hi,

Thanks, I just wrote my own.

Serge

[solidcamx]

hi,

I can help. [email protected]