[Mikkel T]

Do any have any experience duing this. Im a Solid cam novice

The machine is a 4 axis Word working machine

Weeke Venture 108

If any one have any imput it will be much appreciated
maby a better program if needet

Best regards Mikkel

[MilanTristan]

Do any have any experience duing this. Im a Solid cam novice

The machine is a 4 axis Word working machine

Weeke Venture 108

If any one have any imput it will be much appreciated
maby a better program if needet

Best regards Mikkel

and how can people help you if it is not clear what you are asking?😁

[MilanTristan]

Similar to normal vertical milling machine except when you start to use angular head holder which I am interested to know if anyone has a post processor for 3-axis vertical milling with angular head capability (A0, A90, A180, A270)? Hope someone will understand what I mean. 😰

[Mikkel T]

se that is way i added the newbie but what you are describing sounds right. what i need to know is wich machine i need to tel solid cam im using. dot that make any sense?

[MilanTristan]

se that is way i added the newbie but what you are describing sounds right. what i need to know is wich machine i need to tel solid cam im using. dot that make any sense?

your machine i should say i considered 3-axis vertical mill plus angular head capability. I am not sure how your angular head attachment works, whether the head rotates to change orientation and if it can orient from 0-360 degree by what increment. But you should be able to start doing 3-axis jobs with standard tools 😁. Where are you from Mikkel?

[Mikkel T]

that sounds Right the angle head is manual. Im from Denmark so i just pick any of the 3x mashines?

[MilanTristan]

you can pick any 3-axis post-processor and cross your finger that it will generate gcode that your machine can understand 😁. what's your machine's controller? can you post any sample program that you successfully run to the machine?