I have a Baumuller model BM-4543 with a BUS-6M control module and I need to be able to test it. There is no data or manual about these on the Baumuller Web site. The module doesn't seem to communicate with WinBass or WinBass II via X23 (RS232). It seems to be a drive manufactured by Baumuller for a specific function. I was wondering if anyone out there had experience with these?
Thread: Baumuller M-drive
Results 1 to 1 of 1
-
12-09-2013, 03:32 PM #1
Registered
- Join Date
- Oct 2011
- Posts
- 4
Baumuller M-drive
Reply With QuoteSimilar Threads
-
Baumuller spindle drive problem
By R.thayer in forum DNC Problems and SolutionsReplies: 11Last Post: 02-23-2013, 02:43 PM -
Baumuller drive V-controller Need Advice
By Kiyama in forum Servo Motors / DrivesReplies: 0Last Post: 08-16-2012, 12:40 PM -
DX32 hard drive (DOM Flash thumb drive) replacement procedures. WIP
By Cellar Dweller in forum Bridgeport / Hardinge MillsReplies: 4Last Post: 01-06-2012, 05:26 AM -
Sureservo A/C drives to replace old Baumuller
By Bap in forum Servo Motors / DrivesReplies: 1Last Post: 05-16-2007, 04:25 PM -
Sureservo A/C drives to replace old Baumuller
By Bap in forum Servo Motors / DrivesReplies: 0Last Post: 05-16-2007, 03:15 PM
Posting Permissions
