Hi, my new laser machine is using Leetro 6515 and Lasercut 5.3.
I can communicate with the machine from my PC(Win 7). However, there is an issue with this machine. When I tried to cut a sample, the starting point and ending point don't not match and the curve line is not smooth (as seen in the pics).
Does anyone know whether the problem is with the machine or the software lasercut 5.3? Do I need to change some settings in the lasercut 5.3 to solve the problem?
Attachment 216198Attachment 216200
Thanks.
Results 1 to 9 of 9
Threaded View
-
12-30-2013, 02:45 PM #1
Registered
- Join Date
- Apr 2013
- Posts
- 2
Lasercut 5.3 start point and end point not matched and curve line not smooth?
Reply With QuoteSimilar Threads
-
why the laser not line up (cutting original point does not meet end point)
By AmyThunderlaser in forum Laser Engraving / Cutting Machine General TopicsReplies: 2Last Post: 05-30-2014, 03:30 AM -
line out start point
By kendo in forum Mazak, Mitsubishi, MazatrolReplies: 2Last Post: 06-26-2010, 01:00 AM -
Use a point for the start point of a profile.
By dcskid in forum BobCad-CamReplies: 2Last Post: 03-18-2009, 04:31 PM -
Line tangent through point
By mastercamguru in forum MastercamReplies: 9Last Post: 12-07-2008, 01:26 AM -
Line Smoothing, point /line no identification
By dz1 in forum Visual BasicReplies: 8Last Post: 12-15-2007, 12:03 PM
Tags for this Thread
Posting Permissions
