hi
I have a few machines from a hurco mill mb2 and a wasino gang laith bridgport interact 5 and a puma 10 s laith with a 10 t
I have tried to put a wifi recever on all the machines and I got it to work on my wirecutter only has eny one got it working on the 10t
when I transmit I get some very funny text
I know I can not drip feed but all my pgm are short
I am using LM technologies lm 48
On page ten (10) of the LM technologies lm 48 manual it documents the baud rate setting commands. If the baud rate settings are not correct for each individual machine you will have communication errors etc...
I see the default setting for the LM 48 is 19200 bps , the default bps speed for many machines may be 9600.
See attached image for a basic Fanuc setup.
Jeff...
Patience and perseverance have a magical effect before which difficulties disappear and obstacles vanish.
We use cookies to optimize our website for you and to be able to improve it continuously. By clicking the "Accept" button, you expressly agree to the use of cookies. For further information on cookies, please refer to our privacy policy.