Hey guys,

I have been reading on the net that some G0704 owners are having an issue tightening the lower gib tensioner for the Z-axis. The problem is that when it's tightened, the spindle will deflect. If the top tensioner is tightened by itself, you don't get deflection. I am having this same exact issue and I cannot seem to find any solutions.

Has anyone come up with one yet? Are there some things I can try? Should I just remove the lower tensioner completely and forget about it since the top one seems to tighten it by itself? I was thinking that this might be the best way to go.

Any suggestions?