586,263 active members*
3,559 visitors online*
Register for free
Login

Thread: Probing inside corners with the 2010 Screenset

Results 1 to 3 of 3
  1. 01-23-2014, 07:51 PM #1
    Megaplow
    Megaplow is offline Registered
    Join Date
    Nov 2007
    Posts
    87

    Probing inside corners with the 2010 Screenset

    Hello,
    Its been long overdue but I am finally getting into all the probing and auto setup stuff in the 2010 screenset, its awesome! Last night I extended my grounding circuit to 3 1/8" headphone jacks. I have built a corder plate and a circle plate. My plan is to just plug these in when I need to probe those shapes. It seems the screenset will only probe (in two directions) outer corners. Is there a way to have it probe for inner corners?

    Joe
    Reply With Quote Reply With Quote
  2. 01-23-2014, 08:10 PM #2
    ger21
    ger21 is offline Community Moderator
    Join Date
    Mar 2003
    Posts
    35538
    Not unless you modify the macros to do it.
    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
    Reply With Quote Reply With Quote
  3. 01-23-2014, 08:18 PM #3
    Megaplow
    Megaplow is offline Registered
    Join Date
    Nov 2007
    Posts
    87
    Guess its time to add buttons and mess with the macros.

    Thanks,
    Joe
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. 2010 Screenset error confusing me....
    By racedirector in forum Mach Software (ArtSoft software)
    Replies: 1
    Last Post: 05-25-2012, 04:47 PM
  2. Programming Question, Dwelling on Inside Corners
    By nfrees114 in forum Hypertherm Plasma
    Replies: 0
    Last Post: 01-21-2011, 05:11 PM
  3. Inside Square Corners
    By Magnum164 in forum Tormach Personal CNC Mill
    Replies: 10
    Last Post: 08-29-2010, 04:07 PM
  4. Milling Tight Inside Corners???
    By Frogblender in forum BobCad-Cam
    Replies: 11
    Last Post: 05-29-2009, 01:21 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules