Is it possible to setup MadCam to use a 4th axis rotary table sitting on the "XY" table of a vertical milling machine. I'd like to side cut some multi lobe Cam profiles.
And is it possible to setup MadCam to use the lathe Servo Spindle axis "C" and using a "Y" axis Servo Spindle, mill in both the "Z" axis and the "XY" axis?
Cutting and drilling on the OD "Y" axis
or Milling and drilling on the face in "Z" axis by rotating the "Y" Servo Spindle 90 degrees.
"B" axis Servo Spindle sets on the cross slide "X" axis?
Don't seem to have any luck with the "Z" axis and "C" axis working together.
Any help would be great, Thanks
www.yanvrno.com