I am currently trying to connect the x4 spindle controller to the gecko g540 0-10v pwm output. here is a picture of the boards. Any suggestions would be great.I posted a topic in the benchtop section and it had seem to die out. I am not sure how to link the other posts so I decided to start a new one within the syil posts.
Attachment 221656
Attachment 221658
Thread: x4 spindle board to g540
Results 1 to 3 of 3
-
02-02-2014, 03:35 AM #1
Registered
- Join Date
- Jan 2011
- Posts
- 50
x4 spindle board to g540
-
02-02-2014, 06:58 AM #2
Registered
- Join Date
- Jan 2013
- Posts
- 119
Vactorman
The G540 doesn't have a 0-10V PWM outputI am currently trying to connect the x4 spindle controller to the gecko g540 0-10v pwm output.
Mike
-
02-02-2014, 05:49 PM #3
Registered
- Join Date
- Jan 2011
- Posts
- 50
terminal 7 vfd ground
terminal 8 vfd output
terminal 9 vfd 0-10v
and can use for pwm which is isolated
Reply With QuoteSimilar Threads
-
G540 VFd spindle help
By Shwagiedo in forum Spindles / VFDReplies: 0Last Post: 10-01-2013, 01:37 PM -
Mach 3 with a PMDX 126 Board , 107 spindle board
By jandalaser in forum Mach Software (ArtSoft software)Replies: 5Last Post: 05-18-2012, 09:38 PM -
Gecko G540 Interface Board
By RPCElectronics in forum News AnnouncementsReplies: 24Last Post: 09-27-2011, 02:50 PM -
GC-04 Breakout Board for the G540
By phomann in forum Gecko DrivesReplies: 0Last Post: 02-25-2011, 07:24 AM -
G540 + another breakout board?
By 5artist5 in forum Benchtop MachinesReplies: 7Last Post: 07-16-2010, 09:31 PM
Tags for this Thread
Posting Permissions
