So, in the spirit of Pulleys. I have only a certain about of room to work with the height between slabs:
So, I found some gears that arrange as such:
The smaller one is PN: A 6D16-018DF2508
0.458 pitch
The larger one is PN: A 6A16-080NF2510
2.037 pitch
The belts:
https://sdp-si.com/eStore/Catalog/Group/213#
I picked a few random belts:
So, do you guys think the gears will work? I will pull the trigger and purchase them. I have to have the RM2505 screws turned down to a 0.3125 shaft.