Here is my router I have cobbled together out of scrap alum. and other items from the scrapyard. I have only run a few files, but so far everything is working out well. Table travel is something like 24"for x,14 for y and 3.5" on z axis. Leadscrews are 1/2-13 rod, 26000 steps per inch on my microstepping drives.
Steven
Results 1 to 2 of 2
-
11-16-2003, 12:24 AM #1
Registered
- Join Date
- Sep 2003
- Posts
- 18
And yet another first homemade router
-
11-16-2003, 12:28 AM #2
Registered
- Join Date
- Sep 2003
- Posts
- 18
Here is the Z axis, the weakest part of my machine, I plan on running a laminate trimmer or foredom tool for cutter.
Steven
Reply With Quote
Posting Permissions
