Does anyone have a sample barfeeder end of bar sub routine handy? Thanks...m31, m56, m81,,,m0.,, etc.
Does anyone have a sample barfeeder end of bar sub routine handy? Thanks...m31, m56, m81,,,m0.,, etc.
Do you still need this?
yes.. do you have a cyclone?
Yes,I have had one for 5 or 6 years now.
This is at the start of my part program to feed part and and to run the load program when the loader tell the machine the bar is out.
$1(PART NO)
G04.1P3
N25
M83
M5
G99
/M98P00001(BAR LOAD PROGRAM NAME)
M84
G04.1P5
N25G0T2525(STOP)
G0X0Y0Z3.
N00001 Z-1.088(THIS WILL CHANGE EACH JOB)
M11
M81(PUSH ON)
G4X1.0
M00
G0Z.002
M82(PUSH OFF)
M10
G4X2.0
G0Z2.0
M1
Sub Program
M5(NEW BAR LOAD)
G0T2525
G0X0Y-4.0Z1.0
M11
M81(PUSH ON)
M00
G04X1.0
G0Y0
M00
G0Z-1.088
M10
M82(PUSH OFF)
G04X1.0
G0Z2.0
M84
M5
M99
Hope this will help you.
Gracias.
Hi fred..when i am touching off a drill, say T2222 on the cyclone,..does it matter whether im in absolute or incremental when i press " Z0" enter?
I touch off all tools in Absolute and I make all offsets in Incremental.
What year is your Ganesh Cyclone?