[Dave ri]

All ,

It has been sometime since my last post , but i am currently in the market for a small vertical cnc mill with possible manual operation , i have a small shop and need a small machine that i can use for some rotary milling on parts . My requirements are , must be able to mill aluminum , brass with the occassionall stainless parts all small parts , but more inportantly i need the option to mill on round parts . I am a tool and diemaker with extensive experience with cnc but on a larger scale i currently program and run a Mikron vcp 600 as well as others but these machines are to big for what i need . I could go with a manual rotray head but i would like to be able to do all my work automatic for ease of setup and consistancy . Thanks for any help i can get


Dave Ri

[Fastest1]

Sherline makes a nice little CNC rotary table. Hooked to a driver as a 4th it could do many things. I believe they even offer a stand alone table too.

CNC-ready Rotary Table

http://www.sherline.com/8700inst.pdf

[Dave ri]

Thank you Fastest 1 ,

I did look at tthe SHerline setup it would be good but i think the machine it connects to may be to small unless i purchase a cnc mil and can retrofit the table to that machine .

[Tkamsker]

For similar reasons i bought an klippfeld k12 prepared for cnc fit.
Means i send my Motors to factory and they mounted them ..

Gesendet von meinem SM-N9005 mit Tapatalk