Anyone have a toolpath done for the version 4 of the picstep boards?
Thread: Picstep 4 Toolpath
Results 1 to 4 of 4
-
06-02-2006, 10:59 PM #1
Registered
- Join Date
- Jan 2005
- Posts
- 183
Picstep 4 Toolpath
-
06-06-2006, 08:07 PM #2
www.joescnc.com
- Join Date
- Aug 2004
- Posts
- 3215
I just spent a few Hours Making a DWG file ( more than a few) for the PICStep V4.0 I will try it out tonight if i get time and see how it will work, I have it setup to use a 1/8" 60° V-Bit cut depth of 0.01" clad board copper is 0.004", Here is a picture of the DWG file I just Need to Add the Text to the Board as Shown on the PDF's.
Joe
-
06-09-2006, 04:18 AM #3
www.joescnc.com
- Join Date
- Aug 2004
- Posts
- 3215
Well I thought I would Try the Toner Transfer, and it worked like a charm. Here are the pics of it.
-
07-22-2006, 04:24 AM #4
Registered
- Join Date
- Jul 2006
- Posts
- 87
Nice work Joe2000Che :cheers:
Is that PCB white under the copper am i right? Or whats going on?
Never seen that before...
Reply With Quote
Posting Permissions
