586,082 active members*
3,777 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > BobCad-Cam > Default clearance plane

Thread: Default clearance plane

Results 1 to 4 of 4
  1. 02-19-2014, 11:27 PM #1
    BurrMan
    BurrMan is offline Ghost
    Join Date
    Dec 2008
    Posts
    4548

    Default clearance plane

    Al,
    Is there a control for the default clearance plane loaded for a job setup. It's currently coming through at one.
    Reply With Quote Reply With Quote
  2. 02-20-2014, 01:33 AM #2
    LeWhite
    LeWhite is offline Registered
    Join Date
    Dec 2011
    Posts
    295
    Its in Machine setup. Default for all features.
    Reply With Quote Reply With Quote
  3. 02-20-2014, 03:39 AM #3
    BurrMan
    BurrMan is offline Ghost
    Join Date
    Dec 2008
    Posts
    4548
    Quote Originally Posted by LeWhite View Post
    Its in Machine setup. Default for all features.
    Thanks LeWhite! I am interested in the default value of "1", and controlling that.... It was .1 before and is set to 1 now. I would like control of the default value created by any new jobs.
    Reply With Quote Reply With Quote
  4. 02-21-2014, 05:42 AM #4
    LeWhite
    LeWhite is offline Registered
    Join Date
    Dec 2011
    Posts
    295
    Yeah kinda funky, having clearance default to .1000 as I do lots of stuff at 1.0 in post. Seems wizzard defaults would be C= 1.0 R= .250 and F=.100! These arent in setup part/default either.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Feed Plane Overwriting Rapid Plane V26
    By Jbrown74 in forum BobCad-Cam
    Replies: 7
    Last Post: 02-21-2014, 02:17 AM
  2. mastercam check surfaces and clearance plane
    By VBUZZ in forum Mastercam
    Replies: 1
    Last Post: 12-06-2013, 08:01 AM
  3. Clearance / Feed plane - Absolute/Incremental
    By jcnewbie in forum Mastercam
    Replies: 5
    Last Post: 10-09-2009, 05:32 AM
  4. construction plane and tool plane
    By nervis1 in forum Mastercam
    Replies: 9
    Last Post: 11-05-2004, 06:53 AM
  5. cycles initial plane/retract plane
    By HuFlungDung in forum OneCNC
    Replies: 25
    Last Post: 06-27-2003, 01:02 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules