Hello all!
I am making a small laser cutter/engraver CNC with a diode laser.
I have set my system with linuxCNC and the M3/M4 work with the laser driver nicely. I am glad that those guys from buildlog made that great piece of software!
The problem is that the magic Z function won't turn on the laser. The "Test fire laser" button near the magic Z trigger will raise a "Unable to open <146> file" flag. I know that there is a 146.ngc file with a gCode subroutine but I can't figure out how to fix this issue.
Is there something I am doing wrong?
I have set my HAL and INI file with my LPT pins and everything else works ("new build" thread coming when the laser diode arrives...)
Thanks for your time!