[jschmid]

I'm sure this has been discussed at some point, but which parameter do I change to get the parts counter to just count the number of pieces I am machining without having to put in a count-up or down number. I just want to display each part as it is finished.

Thanks in advance,

Jim

[CNC Machine OT]

Check parameter 907 bit 4

[jschmid]

Thanks for the reply,

907 parameter is 01011010

Jim

[asstec-italia]

Option bit is already set.
So please check parameter
40#3 normally 0
219 (normally 30)

in this case M02 or M30 will increas the counter.
If parameter 219 is set 87 (example) then use M87 for counter