Hello,
Just used this machine to run a template for a curved stair case for the Stratford Festival. I just started a 19' curved crown moulding out of styro.
Check it out...Attachment 225404
Hello,
Just used this machine to run a template for a curved stair case for the Stratford Festival. I just started a 19' curved crown moulding out of styro.
Check it out...Attachment 225404
would like to see more pics
Here is a couple of cuts we made on the machine, we used styro to make a crown moulding for a curved wall.Attachment 227604Attachment 227606 and here is the wall.Attachment 227608
The upper and lower curve is cut on the CNC and I framed it 16 on Center, it's about 3ft tall.
Attachment 228498
I flipped unit upside down and started with the "dental" I used PL Premium and screws. I built each layer staggering the seems on each layer.
Attachment 228500
As each layer grows, I can only screw into the top plate (now on bottom) the foam is dense enough to screw into and hold the layer to let the glue dry.
Attachment 228502
Progress please :-)