Most of us using Mach3 have separate home switches for each side, so that when you home the machine, it automatically squares itself using the switches.
Are saying it's out of square all the time, or it's only going out of square (racking) occasionally?
Thread: Adjust gantry to avoid "racking"
Results 1 to 4 of 4
Threaded View
-
02-25-2014, 03:26 AM #2
Community Moderator
- Join Date
- Mar 2003
- Posts
- 35538
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Reply With QuoteSimilar Threads
-
First build "Steel Gantry moving table"
By charlieslasher in forum DIY CNC Router Table MachinesReplies: 33Last Post: 04-11-2017, 03:50 PM -
LinuxCnc "Step Time" "Step Space" "Direction Hold" "Direction Setup" values??
By blau_schuh in forum Dmm TechnologyReplies: 5Last Post: 01-12-2014, 07:07 PM -
X Axis "Goes Off Pattern", "Awry", "Skewed", "Travels"
By DaDaDaddio in forum Laser Engraving / Cutting Machine General TopicsReplies: 1Last Post: 05-06-2013, 09:59 AM -
CNC Gantry from eBay "matzcnc"...comments/experience?
By DMoneyAllstar in forum Waterjet General TopicsReplies: 2Last Post: 07-28-2012, 09:10 PM -
24"X36" All Steal Gantry Mill, 500 oz Chopper driven!
By EvanZ in forum DIY CNC Router Table MachinesReplies: 19Last Post: 11-12-2008, 03:26 AM
Tags for this Thread
Posting Permissions
