Hello dear CNC-Zone!
It has been a long time since I logged me the last time in here...
First I have to thank the great community here, which gave me a lot of knowledge when I designed my machine.
Back then I was 16 years old, and a complete newbie to the DIY CNC world - with the help of the forums here and by reading dozens of threads, I finally managed to build my very own DIY CNC named ripper! Take a look of the result in the short video below!
I have already made a very detailed and pictured wiriteup of the building process on my website, and I am honestly too lazy to post here all pictures again...
Attachment 226888Attachment 226890Attachment 226894Attachment 226898
The ripper is a multi-purpose large area CNC router-table.
The machine has been designed to fulfill different tasks like PCB-milling, 3D foam-milling and even milling in light metals like aluminium, while still obtaining each application´s different important properties. – in just a single machine! Easy to build – Easy to operate
Here is the link to the build log:
PICTURED BUILD LOG
Here is a short overview:
ripper - OVERVIEW
Links to my older Threads here on CNC-Zone with questions regarding my build
http://www.cnczone.com/forums/diy-cn...gs-inside.html
http://www.cnczone.com/forums/steppe...nductance.html
http://www.cnczone.com/forums/spindl...erheating.html
http://www.cnczone.com/forums/mechan...per-shaft.html
I am currently planning to release the cad-data for download very soon.
Your opinion is appreciated!
Kind regards from Austria,
Max