Hi there, Just wondering if anybody has paramater listing with definitions for all or any of the 9000 parameters. :cheers:
Results 1 to 7 of 7
-
06-09-2006, 05:00 PM #1
Registered
- Join Date
- Jun 2006
- Posts
- 4
Fanuc 18T control on a Okuma Howa
-
06-09-2006, 05:10 PM #2
Community Moderator
- Join Date
- Dec 2003
- Posts
- 24223
See your PM's
Al.CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
-
06-09-2006, 05:50 PM #3
Registered
- Join Date
- Jun 2006
- Posts
- 4
There are no 9000 parameters in the manual. The one's I'm talking about are the one's you need to buy from Fanuc.
-
06-09-2006, 05:53 PM #4
Community Moderator
- Join Date
- Dec 2003
- Posts
- 24223
I know. PM me
Al.CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
-
06-09-2006, 06:24 PM #5
Registered
- Join Date
- Jun 2006
- Posts
- 4
Hey Al did you get my Email yet?
-
04-23-2008, 04:50 AM #6
Registered
- Join Date
- May 2007
- Posts
- 17
Okuma Howa
How old is your Okuma Howa? I have a 2R Okuma Howa knee mill. Did you put the Fanuc 18M on it as a retrofit?
-
11-08-2010, 05:34 PM #7
Member
- Join Date
- Jul 2010
- Posts
- 9
Dear All
please help me
Need parameter for okuma howa 2Sp-30H machine power mate D for turret Axis
machine is equipped with fanuc 18TT
i have put the para to power mate D and no alarm at MDI/DPL display
but i found Power mate D PMC is in STOP state and not at all switching to Run mode
Thanks
Email Me:- [email protected]
Reply With Quote
Posting Permissions
